Guttering Product Guide        Fascias.Com     PVC-U Rainwater Systems
 

 

Installation Guide - Page Two

6. Keep screws away from the top of the timber / fascia board as this will avoid splitting  the wood / plastic fascia You should use 10x1.25 screws to fit guttering with two in each bracket .Or one 14 x 1.25 screw should suffice.

Before fixing gutters you should lubricate all seals this makes fitting the clips 100 percent easier if you do not have any silicone spray and the clips are tight a small smear of washing up liquid will help.

Ensure gutters are only fitted up to the cut lines as indicated inside the fitting this allows adequate room for the gutter to expand and contract.

To fit the gutter start at  the out let insert the back edge first up under the retaining clip then push down ward until the front clip fits tightly into place

Ensure the back clip has remained in position and double check the  gutter  is in the marked position .allowing for expansion and contraction. 

Now add a union to add the next piece of gutter, and repeat the process until all fittings are in place.

Add stop ends to the end of each gutter run

FloPlast Guttering Flow Capacity Click Here 

Height 52 mm  X Width 112 mm

Half round  guttering is available in white black brown and grey.

FloPlast Compatibility Table
Manufacturer H/R SQ White
Hunter Yes Yes No
Marley Yes No No
Osma Yes No No
Polypipe Yes Yes No
Terrain No No No
Rymway Yes Yes No
Brett Yes No No
Hepworth Yes Yes No
Although size and shape fit there may be some colour difference.

Back To Page One Click Here

Order Online Now

FloPlast Guttering Flow Capacity Click Here

 

Home Page | Square Line Guttering | Half Round Plastic Guttering | Floplast Niagara Guttering | Deep Flow Guttering | Plastic Soil Pipes | Under Ground Drainage | Plastic Waste Pipes | Gutter Guard Leaf Protection | Ordering I Contact